M650-Quatro

Short Description:

SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.


Product Detail

Product Tags

M500D METAL 3D PRINTING SYSTEM SPECIFICATIONS

M650-Quatro
LASER SYSTEM  Type:fiber laser
Wave Length1064nm
Power:700W×4 (500W/1000W optional)
RECOATING SYSTEM  Process: Double-cylinder Bi-directional powder feeding and scraper coating
Layer Thickness0.02~0.1mm
OPTICAL & SCANNING  Beam (diameter@1/e2):≤ 0.1mm
Scanning GalvanometerScanLab×4
Scanning Speed:up to 34m/s
Building Speed:2-120cm³/h
ELEVATOR  Drive Mode:servo motor precision reduction drive
Printin Board Bearing Weight:≥4000kg
Repositioning Accuracy: ±0.005mm
BUILD VAT  Size:625mm(X)*625mm(Y)*1100mm(Z)
Heat: precision resistance wire heating

Protective GasN2 / Argon

Materials

Stainless Steel /

Die Steel /

Titanium Alloy /

Aluminum Alloy /

Co-Cr Alloy /

Nickel Alloy /

Copper Alloy /

Precious Metal etc.

SOFTWARE  Control SoftwareBulltech
Date Preparation Software:Materialise Magics
Data InterfaceSTL or other convertible format
WORKING CONDITION  Power380VAC 50/60Hz 25KW
Ambient Temperature:15-36ºC
Relative Humidity:≤ 40%
Dimension:3105mm(L)*2750mm(W)*4200m(H)

Key Features

right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1

Parts with high quality surface before polishing

Parts in high accuracy, for precision samples

Directly produce functional metal parts, simplify the manufacture process

Parts have metallurgy and mechanical properties, density over than 99%.

Especially for single part or small amount of functional parts

Bus control system makes the machine faster

Remote APP monitoring and Smart pushing information

International high standard components, more stable and reliable

Self developed and patented control and slicing software, easy to use and cost saving

Samples

1
4
2
5
3
6

  • Previous:
  • Next:

  • Products categories