M300-Multiple

Short Description:

SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.


Product Detail

Product Tags

M300-Multiple METAL 3D PRINTING SYSTEM SPECIFICATIONS

M300-Multiple

LASER SYSTEM  Type:fiber laser
Wave length1064nm
Power500W
RECOATING SYSTEM  Processscraper coating
Layer Thickness:0.02-0.1mm
OPTICAL & SCANNING  Beam (diameter@1/e2):≤0.07mm

Scanning GalvanometerScanLab

Scanning Speed: up to 7 m/s

Building Speed:2-20cm³/h

ELEVATOR  Drive Mode :servo motor precision reduction drive
Printing Board Bearing Weight :200kg
Repositioning Accuracy: ±0.005mm
BUILD VAT  Volume:≥10L
Size250mm(X) * 250mm(Y) * 300mm(Z)
Materials:2-4 different materials prinitng at same time
Protective gasN2 / Argon
Materials
Stainless Steel /

Die Steel /

Titanium Alloy /

Aluminum Alloy /

Co-Cr Alloy /

Nickel Alloy /

Copper /

Precious Metal etc.

SOFTWARE  Control SoftwareBulltech
Date Preparation SoftwareMaterialise Magics
Data InterfaceSTL or other convertible format
WORKING CONDITION  Power220VAC 50/60Hz, 45Amps, single phase
Ambient Temperature:15-36ºC
Relative Humidity:≤ 65%
Dimension: 1600m(L)*1100mm(W)*2600mm(H)

Key Features

right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1

Parts with high quality surface before polishing.Parts in high accuracy, for precision samples

Realize 2-4 different metal powders printing at same time

Directly produce functional metal parts, simplify the manufacture process

Parts have metallurgy and mechanical properties, density over than 99%.

Especially for single part or small amount of functional parts

Bus control system makes the machine faster

Remote APP monitoring and Smart pushing information

International high standard components, more stable and reliable

Self developed and patented control and slicing software, easy to use and cost saving

Samples

WechatIMG90
4
WechatIMG89
5
WechatIMG87
6

  • Previous:
  • Next:

  • Products categories