M280

Short Description:

SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.


Product Detail

Product Tags

M280 METAL 3D PRINTING SYSTEM SPECIFICATIONS

M280

LASER SYSTEM  TypeFiber laser
Wave Length1064nm
Power500W
RECOATING SYSTEM  Processscraper coating
Layer Thickness:0.02-0.1mm
OPTICAL & SCANNING  Beam (diameter@1/e2)0.05-0.15mm
Scanning GalvanometerScanLab
Scanning Speed:up to 10.0m/s
Building Speed4-20cm³/h
ELEVATOR  Drive Mode :servo motor precision reduction drive Printing Board Bearing Weight:≥ 200 kg
Repositioning Accuracy: ±0.01mm
RESIN VAT  VolumeApprox. 25L
Size280mm(X) * 280mm(Y) * 350mm(Z)
Heat: Precision resistance wire heating
Protective GasN2 / Argon
Materials
Stainless Steel /
Die Steel /
Titanium Alloy /
Aluminum Alloy /
Co-Cr Alloy /
Nickel Alloy /
Copper Alloy /
Precious Metal etc.
SOFTWARE  Control SoftwareBulltech
Date Preparation Software3dLayer
Data InterfaceCLI file, SLC file, STL file
WORKING CONDITION  Power200~240VAC 50/60Hz, single phase, 25Amps
Ambient Temperature:15-36ºC
Relative Humidity:≤ 40%
Dimension: 1750m(L)*1360mm(W)*2160mm(H)

Key Features

right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1
right-arrow-double-1

Parts with high quality surface before polishing

Parts in high accuracy, for precision samples

Directly produce functional metal parts, simplify the manufacture process

Parts have metallurgy and mechanical properties, density over than 99%.

Especially for single part or small amount of functional parts

Bus control system makes the machine faster

Remote APP monitoring and Smart pushing information

International high standard components, more stable and reliable

Self developed and patented control and slicing software, easy to use and cost saving

Samples

1
4
2
5
3
6

  • Previous:
  • Next:

  • Products categories